Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 309
Local Answering Machine
Call Acceptance
Call Acceptance Rules
2. Select or clear the Group calls check box.
Call Acceptance Rules
Call acceptance and the announcement assignment can be configured on a call-specific basis.
More Details about Call Acceptance Rules
The type of call acceptance can be configured depending on the type of call. The system distin-
guishes between the following call types:
The sequence displayed here corresponds to the sequence that is taken into account in the
settings. Relevant call types, for which call acceptance has not been configured, are ignored
when there is an inbound call. Instead, the system searches for the next applicable call type. If
no setting has been made for any of the relevant call types, the settings for the call type Miscel-
laneous calls are used.
The following call types are generally not taken by the answering machine:
• Callbacks
• InterCom calls
• Wake-up calls
• Alarm calls
The answering machine cannot differentiate between scheduled calls, fallback subscribers, or
unsuccessful attempts to connect calls, and normal internal calls, and so it takes all these calls.
Switches the acceptance of group calls on.
Switches the acceptance of group calls off.
A Anonymous calls (does not transfer a telephone number)
B From contact (caller transmits a telephone number that is present in the
telephone book)
C External calls (caller is an external subscriber)
D Internal calls (caller is an internal subscriber)
E Door calls (caller is any door terminal)
F Miscellaneous calls