Operation Manual

312 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Local Answering Machine
Call Acceptance
Configuring Call Acceptance Rules
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure Call Acceptance Rules
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
– At least one announcement
1. Tap on Apps > Settings > Auerswald > Answering machine > Call
acceptance > Call acceptance rules.
2. If necessary, select the check box of the call type for which you would like to configure
call acceptance.
The Call acceptance and Announcement list fields are displayed.
3. Depending on which call type you selected, proceed as follows.
• All call types except From contact: Tap on Call acceptance and select one of the
following options for the relevant call type.
• Only From contact: Press the Contact/Telephone book key, open the
required contact, press the Menu key and then select one of the following
options in Options > Contact-specific settings > Call Acceptance:
Press the Back key to return to the Settings for call acceptance rules.
Announcement and recording: At the end, the caller hears the
selected announcement and can then leave a message on the
answering machine.
Only announcement: At the end, the caller hears the selected
announcement; however, they cannot leave a message on the
answering machine.
No call acceptance: The call from this caller is not accepted by the
answering machine.
Announcement and recording: At the end, the caller hears the
selected announcement and can then leave a message on the
answering machine.
Only announcement: At the end, the caller hears the selected
announcement; however, they cannot leave a message on the
answering machine.
No call acceptance: The call from this caller is not accepted by the
answering machine.