Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 337
Local Answering Machine
Forwarding Messages by E-Mail
Configuring and Operating a Function Key for Call Forwarding by E-Mail
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– A set up e-mail account (see chapter Local Answering Machine > E-Mail Settings)
Using the Telephone to Configure a Function Key for Forwarding by E-Mail
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on:
• Functions listed alphabetically: TAM e-mail.
• Functions sorted by group: Answering machine > TAM e-mail.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch forwarding by e-mail on or off depending on the
status.
switch on: Press the key to switch forwarding by e-mail on.