Operation Manual

414 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Message Forwarding
Switching Message Forwarding On/Off
Message Forwarding
The message forwarding function means you can be notified by the voice mailbox set up for
the telephone number configured on the PBX when new messages arrive.
Switching Message Forwarding On/Off
You can switch message forwarding on or off as follows:
• Using the telephone
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– The voice mailbox has been configured and assigned in the PBX
– The destination for message forwarding has been configured for the voice mailbox in the PBX
To switch message forwarding on or off, press the function key that has been configured for
message forwarding.
Alternatively, proceed as described below.
1. Tap:
• Functions listed alphabetically: Apps > Functions > VMB message
fwd.
• Functions sorted by group: Apps > Functions > Voice mailbox >
VMB message fwd..
2. In the Operation list field, select one of the following options:
3. In the VMB number entry field, enter the voice mailbox's telephone number.
4. Tap on Execute.
switch on: Enables message forwarding.
switch off: Disables message forwarding.