Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 465
Settings
Providers and PBXs
Configuring the SIP Session Timer
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Click on the SIP tab.
4. Under SIP settings, select or clear the SIP session timer check box.
5. Under SIP settings, enter a value in the SIP session timer interval (min) entry field.
Possible entries:
Note: When the SIP session timer is switched on, this can result in increased
breaks in conversations after the set interval, if a provider has not imple-
mented the renewal of the session cleanly. In this case, you should disable
the SIP session timer.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure the SIP Session Timer
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Under SIP settings, tap on SIP.
4. Select or clear the SIP session timer check box.
5. Tap Interval for SIP session timer (min) and then enter a value in the entry field.
Possible entries:
Enables the SIP session timer.
Disables the SIP session timer. (No further action is required.)
5 to 60: The SIP session timer checks at intervals of between 5 minutes and 60
minutes to see if the connection is still present.
Enables the SIP session timer.
Disables the SIP session timer. (No further action is required.)
5 to 60: The SIP session timer checks at intervals of between 5 minutes and 60
minutes to see if the connection is still present.