Operation Manual
486 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Entering Keypad Sequences
• Separately for the provider or PBX
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter Keypad Sequences
1. Open the Settings > Providers & PBXs screen.
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Click on the Numbers tab.
4. Under Special numbers, enter the keypad sequences in the Keypad sequence ...
entry fields. Possible entries:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Enter Keypad Sequences
Requirements:
– Set type PBX
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Under Number settings, tap on Special numbers.
4. Tap on the name of the relevant keypad sequence and then enter the keypad
sequence in the entry field. Possible entries:
5. Tap on OK.
Up to 40 digits
Numbers and the characters * and #
Up to 40 digits
Numbers and the characters * and #