Operation Manual

496 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Configuring the Network Interface Type
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure the Network Interface Type
1. Open the Settings > Providers & PBXs screen.
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Under Providers & exchange systems settings, select one of the following options
from the Network interface type list field:
Further steps:
– Save your settings before you leave the screen.
– Depending on which interface type you have selected, enable VLAN (Settings> Network
screen) or VPN (Settings> Network> VPN screen).
Using the Telephone to Configure the Network interface type
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Tap on Network interface type.
4. In the Network interface type list field, select one of the following options:
Further steps:
– Depending on which interface type you have selected, enable VLAN ( Apps >
Settings > Network > Network > VLAN) or VPN ( Apps > Settings > Network
> Network > VPN).
Default network: The default network is used as the network interface type.
VLAN: The VLAN network interface type is used.
VPN: The VPN network interface type is used.
Default network: The default network is used as the network interface type.
VLAN: The VLAN network interface type is used.
VPN: The VPN network interface type is used.