Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 497
Settings
Accounts
Creating an Account
Accounts
You can create up to 100 accounts with VoIP providers or on PBXs on your telephone.
However, before you can get the access data you need to make VoIP calls, you first need to
set up accounts with one or more VoIP providers. To do this, use your name and address data
to register on the provider's website. After that, you will be assigned one or more telephone
numbers that can be reached from the land line and the Internet, and also an account with a
username and password. The registered connection usually becomes active within a few
minutes and can be used very soon after that.
The Account overview under Settings > Accounts shows two different types of account:
• Own accounts:
These are your own telephone accounts that you created on the telephone or by using
its configuration manager with the VoIP provider or on a PBX.
• PBX accounts:
These are additional accounts created by the PBX when you set up your own account
and which are used for direct or specific exchange line access.
Note: Additional PBX accounts are only generated if an exchange line
access number has been entered when the provider/PBX was being created.
Creating an Account
To create an account, you require the following settings:
• Account name
• Providers & PBXs
• Username
• Password
• Authentication ID (if assigned by the provider/PBX)
• Country and local area code (if the telephone is configured as a system telephone)
• Connection type
• Telephone Numbers
You can create an account as follows:
• Using the configuration manager
• Using the telephone