Operation Manual
504 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Enabling/Disabling Use as a System Telephone
Using the Telephone to Select a Provider/PBX
Requirements:
– At least one provider/PBX profile has already been set up
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on Providers & PBXs.
4. Follow these steps:
• Select existing provider/existing PBX: Tap on the required provider/PBX.
• Configure new provider/PBX: You can also configure new providers/PBX and their
profiles here and then select them (see chapter Settings> Provider and PBX).
Further steps:
– Make further settings.
Enabling/Disabling Use as a System Telephone
The telephone can be used as a system telephone on no more than one account and so control
the following functions in an Auerswald PBX:
• External line transfer
• Boss/secretary function
• Targeted exchange line access
• Group
• Group function off
• Configuration Switchover
• Relay
• Call forwarding for external subscribers
• Announcement before answering for group
• Door function
Note: If the telephone is enabled as a system telephone for an account, all
the PINs and passwords, and also the prefixes entered for this account are
overwritten by the PBX.