Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 507

Settings

Accounts

Enabling Use as the Default Account

When you set up the telephone you must specify which account is to be used as the default

account. Only one account can be used as a default account. Its use as the default account is

disabled as soon as another account becomes the default account.

Note: To use a different account from the default account for a single call,

pick up the receiver or press the hook key. Tap on the VoIP account

field in the selection window and then select the required account in the list.

You can switch the default account on as follows:

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Enable Use as a Default Account

1. Open the Settings > Accounts screen.

2. In the line that contains the required account, click Configure.

3. Select the Default account (default) check box under Settings for the selected

account.

The Default account (standard) setting is shown in grey to show that the account is

now to be used by default. Its use as the default account can only be disabled by

enabling a different account as the default account.

Further steps:

– Make further settings on the configuration screen.

– Save your settings before you leave the screen.

Using the Telephone to Enable Use as a Default Account

1. Tap on Apps > Settings > Accounts.

2. In the Account overview, tap on the required account.

3. Select the Default account (standard) check box.

This account will then be used as the default account.

To use this account, it has to be selected manually.