Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 509
Settings
Accounts
Entering a Password for the Account
– Make further settings on the configuration screen.
– Save your settings before you leave the screen.
Using the Telephone to Enter a Username for the Account
Requirements:
– You need to know the internal telephone number for the telephone entered in the PBX config-
uration, or the user name assigned by the VoIP provider
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on the User name and then enter the user name (the internal telephone number
set in the PBX or the user name assigned by the VoIP provider) in the relevant entry
field. Possible entries:
4. Tap on OK.
Further steps:
– Make further settings.
Entering a Password for the Account
Your VoIP provider will supply you with your password along with all the other data you require
to access your account. If your telephone is connected to an Auerswald PBX, the password
you entered when configuring the PBX is the same as the password for the telephone.
However, if you did not enter a password for the telephone in the PBX configuration, simply
leave this field empty.
You can enter a password for an account as follows:
• Separately for each account
• Using the configuration manager
• Using the telephone
Up to 64 digits
Numbers and characters