Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 517
Settings
Accounts
Entering Telephone Numbers
• Using the telephone
Using the Configuration Manager to Enter Telephone Numbers
1. Open the Settings > Accounts screen.
2. In the line that contains the required account, click Configure.
3. Click on the Numbers tab.
4. Click on Configure.
5. In the Name entry field, enter a name for the telephone number. Possible entries:
6. In the Number entry field, enter the telephone number without prefixes. (Internal
telephone number (MSN) for the standard connection, DDI or MSN for SIP trunking).
Possible entries:
7. Select or clear the Default subscriber number check box.
8. In the Subscriber number type list field (only active if the configured connection type
is SIP trunking), select the telephone number type.
Note: If you have selected the SIP Trunking connection type, you must
specify here whether the telephone number involved is the extension (DDI)
to the DDI main number, or a multiple subscriber telephone number (MSN)
adopted from an earlier ISDN connection to the VoIP connection.
9. Select the ringtone you want to use from the Ringtone list field.
Further steps:
– Make further settings on the configuration screen.
– Save your settings before you leave the screen.
Up to 64 digits
Numbers and characters
Up to 40 digits
Numbers and characters
Telephone number is used as the default for outgoing calls.
Telephone number is not used as the default number.