Operation Manual

524 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Configuring the Voice Mailbox (SIP Account)
Note: This telephone number is used to fetch messages, by pressing the
message key and, if required, a function key to which the MWI function is
assigned. If you do not enter a telephone number for fetching messages, the
mailbox's telephone number is used instead.
10. Tap on OK.
11. Select or clear the Explicit Message Waiting Indication subscription check box.
Note: Some VoIP providers do not send status messages until they have
been explicitly requested by the telephone. Disable this option if the VoIP
provider sends status messages without you having to request them.
12. If you have enabled explicit MWI subscription, tap on MWI subscription number and
enter the MWI subscription number in the entry field. Possible entries:
13. Tap on OK.
14. Select or clear the Personal voice mailbox check box.
Note: If a VoIP account has several voice mailboxes, the LEDs on the
message key always display the status of all the configured voice mailboxes.
It is not possible to switch on the display just for one particular voice mailbox
on a VoIP account. In this case use the "Personal voice mailbox" function to
display the status of a particular voice mailbox in the status line.
Further steps:
– Make further settings.
Up to 40 digits
Numbers and the characters * and #
Explicit MWI subscription is active.
Explicit MWI subscription is not active.
Up to 40 digits
Numbers and the characters * and #
Switches the use as a personal voice mailbox on. The status of the voice
mailbox is displayed in the status widget.
Switches the use as a personal voice mailbox off. The status of the voice
mailbox is not displayed in the status widget.