Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 525
Settings
Bluetooth (only COMfortel 3600 IP)
Switching Bluetooth On/Off and Configuring It
Bluetooth (only COMfortel 3600 IP)
The wireless Bluetooth technology enables you to connect a keyboard, a headset, or a mobile
phone, e.g. for automated call forwarding. Data can also be exchanged between the mobile
phone and the telephone via the Bluetooth interface. The maximum range in the Bluetooth
network is 10 m.
Switching Bluetooth On/Off and Configuring It
Requirements:
– Bluetooth dongle plugged into the exclusive USB port (see chapter Indroduction to the
telephone > Device overview > Overview of connections).
If the bluetooth function has been enabled, a pairing request from the telephone can be send
to or accepted from another device.
Note: In sensitive areas, in which the use of Bluetooth is generally prohibited,
you can also remove the Bluetooth dongle from the telephone, in addition to
switching Bluetooth off.
You can switch Bluetooth on and off, and configure it, as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Bluetooth On/Off
Requirements:
– Bluetooth dongle plugged into the exclusive USB port (see chapter Indroduction to the
telephone > Device overview > Overview of connections).
1. Open the Settings > Network > Bluetooth screen.
2. Under Bluetooth, select or deselect the Bluetooth check box.
Further steps:
Switches Bluetooth on.
Switches Bluetooth off.