Operation Manual

528 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Bluetooth (only COMfortel 3600 IP)
Configuring and Operating a Function Key for Bluetooth
Using the Telephone to Configure a Function Key for Bluetooth
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on Bluetooth.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. Tap on Assign.
8. Tap on Exit.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press a key to switch Bluetooth on or off, depending on its initial state.
switch on: Press the key to enable Bluetooth.
switch off: Press the key to disable Bluetooth.