Operation Manual

530 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015

Settings

Network

Configuring the Telephone's IP Address Manually

The telephone's IP address is used to uniquely identify that telephone on the network.

You can configure the telephone's IP address manually as follows:

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Configure the Telephone's IP Address

Requirements:

– switched-off DHCP client

1. Open the Settings > Network > Network screen.

2. Under Ethernet settings, enter the telephone's IP address in the IP address entry

field. Possible entries:.

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Configure the Telephone's IP Address

Requirements:

– switched-off DHCP client

1. Tap on Apps > Settings > Network > Network.

2. Tap on IP address and then enter the IP address of the telephone. Possible entries:

3. Tap on OK.

Configuring the Subnet Mask

You can configure the subnet mask as follows:

IP address with a range of 0 to 255 (example: 192.168.0.240)