Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 531

Settings

Network

Configuring a Gateway

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Configure the Subnet Mask

Requirements:

– switched-off DHCP client

1. Open the Settings > Network > Network screen.

2. Under Network settings, enter the subnet mask in the Subnet mask entry field.

Possible entries:.

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Configure the Subnet Mask

Requirements:

– switched-off DHCP client

1. Tap on Apps > Settings > Network > Network.

2. Tap on Net mask and then enter the net mask in the entry field. Possible entries:

3. Tap on OK.

Configuring a Gateway

A gateway is a PC or router that acts as an intermediary between two different networks. The

Internet service provider is the gateway for direct Internet dial-up connections. If you use a

router, this is the gateway in a local network.

You can configure a gateway as follows:

• Using the configuration manager

IP address with a range of 0 to 255 (example: 255.255.255.0)