Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 535
Settings
Network
Switching DiffServ On/Off
4. Tap on Proxy hostname and enter the HTTP proxy in the relevant entry field.
Possible entries:
5. Tap on OK.
6. Tap on Port and then enter the associated port number (port) in the entry field.
Possible entries:
7. Tap on OK.
8. Tap on Bypass proxy for and enter the address of the local host which the proxy is
to bypass in the entry field. You can make the following entries (use commas to
separate them):
9. Tap on OK.
Switching DiffServ On/Off
You can use DiffServ (Differentiated Services Flag) to give preference to language packages
(VoIP) and to achieve better voice quality for VoIP calls. DiffServ can be evaluated in networks
that include active network components such as routers or switches, to enable packets to be
forwarded according to their priority.
Note: DiffServ is not supported by all VoIP providers. When used in a
standard VoIP account, these settings may not be applied in some situations.
You can switch the DiffServ function on and off as follows:
• Using the configuration manager
• Using the telephone
Switches the HTTP proxy on.
Switches the HTTP proxy off. (No further action is required.)
IP address with a range of 0 to 255 (example: 123.123.123.123)
Fully Qualified Domain Name (for example: hostname.domainname)
1 to 65535
IP address with a range of 0 to 255 (example: 123.123.123.123)
Hostname