Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 553
Settings
Sound
Setting a Default Ringtone
1. Tap on Apps > Settings > Device > Sound.
2. Under General, tap on Volume.
3. Tap the relevant slider and drag the handle to the required position.
4. Tap on OK.
Setting a Default Ringtone
You can set a default ringtone as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Set a Default Ringtone
1. Open the Settings > Device > Sound screen.
2. Under Settings for tones, select the ringtone you want from the Default ringtone list
field.
Note: You can add additional ringtones to the telephone. To do this, remove
the SD card and use the SD card reader to connect the card to a PC. On the
SD card, create a folder called ringtones and copy the ringtone file (*.wav)
into that folder. After you have inserted the SD card in the telephone again,
the ringtone is displayed in the Default ringtone list field.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Set a Default Ringtone
1. Tap on Apps > Settings > Device > Sound.
2. Under Call ringtone, tap onRing tone and select the required ring tone from the list
field.