Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 573

Settings

Display and LEDs

Switching Off the Idle State (Sleep)

Notes:

The idle state (sleep) is switched off automatically if, for example, an

incoming call is signalled, or if the alarm rings. If the screen lock is set, the

idle state is enabled again immediately after the event.

Simply press a key to switch off the idle state.

You can switch off the idle state as follows:

• Using the telephone

Requirements:

– Screen lock: Password

1. Press any key on the telephone (apart from the function keys).

The idle state (sleed) without screen lock is disabled. (No further action is required.)

If the idle state (sleep) with screen lock is enabled, a dialogue opens so you can enter

the password.

2. Only with screen lock: Enter the screen lock password and tap on OK.

The idle state (sleep) is disabled.

Configuring Screen Candy

You can configure the screen candy whilst the telephone is in power save mode (idle state,

sleep).

You can configure screen candy as follows:

• Using the telephone

1. Tap on Apps > Settings > Device > Display > Screen Candy.

2. Depending on what type of screen candy you select, you may need to make

additional settings:

• Tap on Clock to display a clock in the display. To make additional settings for the

clock, tap on .