Operation Manual

578 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Display and LEDs
Configuring the Display
• Only one star orange: You are currently at the extreme limit of the proximity range.
• Both stars orange: You are within the proximity range.
3. Tap on OK.
Configuring the Display
If the telephone display does not react as you expect when you touch it, you must configure it.
You can configure the display as follows:
• Using the telephone
1. Tap on Apps > Settings > Device > Display > More > Touch calibration.
A cross appears in the top left-hand part of the screen.
2. Tap on the middle of the cross.
A cross appears in the lower right-hand part of the screen.
3. Tap on the middle of the cross.