Operation Manual

590 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
IP Camera
Switching Full Screen Mode On/Off
4. Tap on OK.
Switching Full Screen Mode On/Off
If full screen mode is switched on, the IP camera's picture is displayed in full screen mode in
the telephony app for both incoming and outgoing calls.
If the full screen mode is switched off, the IP camera's picture is displayed, but greatly reduced.
Note: In the telephony app you tap to switch on full screen mode for
the duration of the call or tap on to switch off full screen mode.
You can switch full screen mode on and off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Full Screen Mode On and Off
1. Open the Settings > Auerswald > IP camera screen.
2. In the line containing the required IP camera, click Configure.
3. Select or clear the Fullscreen check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Full Screen Mode On and Off
1. Tap on Apps > Settings > Auerswald > More > IP camera.
IP address with a range of 0 to 255 (example: 192.168.0.240)
URL (example: ipcamera.uk)
Switches on full screen mode.
Switches off full screen mode.