Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 595
Settings
IP Camera
Entering a Password for the IP Camera
Entering a Password for the IP Camera
You can enter a password for the IP camera as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter a Password
1. Open the Settings > Auerswald > IP camera screen.
2. In the line containing the required IP camera, click Configure.
3. Enter the password in the Password entry field. Possible entries:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Enter a Password
1. Tap on Apps > Settings > Auerswald > More > IP camera.
2. Tap on the name of the IP camera.
3. Tap on Password and then enter the password in the entry field. Possible entries:
4. Tap on OK.
Switching Increased Security On/Off
If increased security is enabled, the picture from the IP camera is only displayed in the
telephony app when an incoming call is received.
Up to 64 digits
Numbers and characters
Up to 64 digits
Numbers and characters