Operation Manual

596 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
IP Camera
Configuring the IP Camera Control
If increased security is disabled, the picture from the IP camera is displayed in the telephony
app and on the IP camera app.
You can switch increased security on and off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Increased Security On/Off
1. Open the Settings > Auerswald > IP camera screen.
2. In the line containing the required IP camera, click Configure.
3. Select or clear the Increased security check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Increased Security On/Off
1. Tap on Apps > Settings > Auerswald > More > IP camera.
2. Tap on the name of the IP camera.
3. Under Access data, select or clear the Increased security check box.
Configuring the IP Camera Control
You can use the telephone's directional pad to control tiltable and zoomable PTZ (pan-tilt-
zoom) cameras.
Switches increased security on.
Switches increased security off.
Switches increased security on.
Switches increased security off.