Operation Manual

622 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Date and Time
Setting the Date and Time Manually
Date and Time
The telephone's status line shows the calendar week, date and time. If the telephone is in its
idle state (sleep), the date and time are also displayed on the display.
The date and time are needed to log incoming and outgoing calls and to control the telephone
functions, e. g. automatic updates.
Note: The time is converted automatically from winter time to summer time
and vice versa (GMT +1:00 or GMT +2:00) on the appropriate dates.
Setting the Date and Time Manually
If the function that automatically updates the phone time is disabled, you can set the date and
time manually.
You can set the date and time manually as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Set the Date and Time Manually
1. Open the Settings > System > Date & Time screen.
2. If necessary, clear the NTP (Network Time Protocol) check box.
The Date and Time entry fields are displayed.
3. Enter the date in the Date entry field.
4. Enter the time in the Time entry field. Possible entries:
• Use 24-hour format check box selected:
• Use 24-hour format check box not selected:
Time using the hh:mm format
00 to 23: Hours ("hh")
00 to 59: Minutes ("mm")