Operation Manual

630 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Backup and Reset
Creating a Backup
Backup and Reset
During a data backup, a backup file is created that contains the configuration and other data
for the telephone. If necessary, the backup file can be restored to the telephone.
Resetting the telephone to the factory settings will delete all data on the telephone.
Creating a Backup
When you create a data backup, a backup file (Backup) will be generated on the chosen
medium.
You can create a backup as follows:
• Using the configuration manager (for saving on a PC)
• Using the telephone (for saving on a SD card, internal memory or USB stick)
Note: The internal memory and the USB port is only available on a COMfortel
3600 IP.
Important: If you reset to factory settings, a backup on the internal memory
will be deleted.
Using the Configuration Manager to Create a Backup
1. Open the Settings > Personal > Backup & reset screen.
2. Under Create backup, click on Read (after Create a backup of your data on your
PC).
The dialogue in which you save the backup file opens.
3. Click on Save file (this text depends on which browser you are using).
4. Click on OK.
The backup file is saved in the folder configured for downloads on the PC.
Using the Telephone to Create a Backup
Requirements: