Operation Manual

636 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Update and Provisioning
Triggering a Manual Update
3. Select the required file (*.rom) and then click Open (this text varies according to which
operating system is in use).
The file path is displayed under Manual update.
4. Click Save.
The message Please wait, firmware is being updated is displayed.
As soon as the firmware is installed in the telephone, a dialogue opens.
5. To activate the new firmware, click Reboot.
Note: To restart the telephone at a later point in time, tap on Cancel and then,
under Settings > System > Update & provisioning > Reboot, tap on
Reboot when you want to restart the telephone.
The telephone is restarted.
Further steps:
– After a firmware update you usually require a new version of the instructions. You will find up-
to-date instructions on the Internet (see www.auerswald.de).
– In order to use the new features after the telephone's firmware has been updated, you often
may need to update the PBX firmware (see PBX operation instructions).
Using the Telephone to Initiate a Manual Update
Requirements:
– SD card inserted into slot
– A firmware file (*.rom), saved in the root directory of the SD card
– SD card inserted into slot (min 128 MB of free memory )
Notes:
You will find the required firmware file on the Internet (see
www.auerswald.de/service).
To get information about the firmware version that is currently saved in the
telephone, select Apps > Settings > System > About phone
or, in the configuration manager, click on the Auerswald logo with the left-
hand mouse button.
1. Tap on Apps > Settings > System > Update & provisioning.