Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 639
Service and Maintenance
Update and Provisioning
Switching Automatic Provisioning On/Off
You can switch automatic provisioning of configuration data on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Automatic Provisioning On/Off
Requirements:
– The PBX or telephone must be connected to a broadband Internet connection
– Address of the DNS server entered on the Settings > Network > Network screen
– The set schedule must be entered on the Settings > System > Update & provisioning >
Update screen
– The address of the provisioning server must be entered on the Settings > System > Update
& provisioning > Provisioning screen
– When automatic provisioning is performed: SD card inserted into slot (min 128 MB of free
memory )
1. Open the Settings > System > Update & Provisioning > Provisioning screen.
2. Select or clear the Automatic provisioning check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Automatic provisioning On/Off
Requirements:
– The PBX or telephone must be connected to a broadband Internet connection
– The address of the DNS server must be entered in Apps > Settings > Network >
Network
– The set schedule must be entered under Apps > Settings > System > Update
& provisioning
– The address of the provisioning server must be entered under Apps > Settings >
System > Update & provisioning > Automatic provisioning
– When automatic provisioning is performed: SD card inserted into slot (min 128 MB of free
memory )
Switches on automatic provisioning.
Switches off automatic provisioning.