Operation Manual

642 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015

Service and Maintenance

Update and Provisioning

Entering the Address of the Provisioning Server

If automatic provisioning of the configuration data is not carried out via DHCP data or via a

redirection server, you must enter the address of the provisioning server.

You can enter the address of the provisioning server as follows:

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Enter the Address of the Provisioning Server

1. Open the Settings > System > Update & provisioning > Provisioning screen.

2. In the Provisioning server URL entry field, under Automatic Provisioning, enter

the address of the update server. Possible entries:

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Enter the Address of the Provisioning Server

1. Tap on Apps > Settings > System > Update & provisioning.

2. Under Automatic provisioning, tap on Provisioning server URL.

3. Enter the address of the provisioning server in the Provisioning server URL entry

field. Possible entries:

4. Tap on OK.

IP address with a range of 0 to 255 (example: 103.103.103.103)

URL (example: provisioningserver.uk)

IP address with a range of 0 to 255 (example: 103.103.103.103)

URL (example: provisioningserver.uk)