Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 93

Telephoning

Incoming Calls

Putting a Caller On Hold

When you receive a call, proceed as described below.

1. Pick up the receiver or tap on .

You will be connected with the caller.

2. Tap on .

You will hear the internal dial tone. The caller on hold hears the on-hold music.

3. Tap on .

You will be connected with the caller.

Forwarding Incoming Calls

When you receive a call, proceed as described below.

1. Tap on .

2. Enter the destination number or select the required VoIP account and telephone

number in the selection window.

Important: Enter telephone numbers exactly as when dialling, for example,

always enter external telephone numbers with a leading exchange line

access number. In the factory settings, the PBX's exchange line access

number is "0", but it can be changed in some PBXs (refer to the instructions

for the PBX).

Note: Tap on to forward the call to the answering machine.

3. Tap on .

The subscriber is called.

Note: If the destination number is saved on the programmable function key

(speed dialling key), you can forward the call by simply pressing this key and

then tapping on . You no longer need to select the function in advance

via the display.