Operation Manual

98 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Telephoning
Outgoing Calls
Dialling a Telephone Number with Dial Preparation
• Manual entry: Enter the telephone number manually.
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. In the factory settings, the PBX's exchange line access
number is "0", but it can be changed in some PBXs (refer to the instructions
for the PBX).
Notes:
When dialling through a standard SIP account, you can prevent the local
area code from being output automatically by entering a leading "#"
and thereby reach the VoIP provider's voice mailbox, for example.
As soon as you have dialled the first digit, you can cancel or restart the
selection by tapping on , or delete the most recently entered digit by
tapping on .
• Selection: In the selection window, select the required VoIP account and a
telephone number.
Note: Tap on to display the external contact list and select an external
account (exchange line). Tap on to display the internal contact list. Only
internal telephone numbers can be dialled.
Once you have finished dialling the telephone number, the subscriber will be called.
Dialling a Telephone Number with Dial Preparation
1. Dial a telephone number.
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. In the factory settings, the PBX's exchange line access
number is "0", but it can be changed in some PBXs (refer to the instructions
for the PBX).
Notes:
When dialling through a standard SIP account, you can prevent the local
area code from being output automatically by entering a leading "#"
and thereby reach the VoIP provider's voice mailbox, for example.