Specifications

-11-
On Screen Display (continued)
8.4.3 MAIN FORMAT
Allows the user to manually override the auto input detection. The firmware detects the input format automatically and
converts it to selected display format.
8.4.4 PiP FORMAT
Allows the user to manually override the auto input detection. The firmware detects the input format automatically and
converts it to the selected display format.
8.4.5 DVI/RGB MODE
This feature sets the DVI/RGB input mode to NORM, WIDE, or VIDEO. Since WVGA & WXGA sources have very similar
frequencies it tells the micro controller to go to the proper setting when set to WIDE. If a 480p, 720p, or 1080i source is
being used then VIDEO would be the best choice. Otherwise, NORM will handle most of the standard PC resolutions.
ADC CLOCK &
8.4.6 AUTO ADJUST
Selecting this feature when RGB is selected and a source is present will try to lock the Clock, Phase, H. Position, and V.
Position. If the Auto feature can not figure the value it will exit without any effect.
8.4.6 ADC PHASE
Allows the user to manually override the default ADC clock & phase for various RGB graphic modes. The clock and
phase are good for cleaning up noisy images by assuring a clean lock. The firmware programs the ADC phase to zero
for all input modes. The menu item is disabled when the input is not RGB.
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMAT AUTO
DVI/RGB MODE NORM
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMAT AUTO
DVI/RGB MODE NORM
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMAT AUTO
DVI/RGB MODE NORM
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMAT AUTO
DVI/RGB MODE NORM
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST