Specifications

On Screen Display (continued)
8.6.3 SOURCE / COUNTRY (PAL / SECAM Version)
There are three choices for TV sources: BCST (broadcast), CATV(cable), IRC and HRC. The default setting is CATV.
If this unit is a PAL / SECAM version then there is a place for Country code.
8.7 PiP SETUP
The PiP setup menu is used to subdivide the screen into a pre-defined set of windows. The actual formats are different
depending on aspect ration of the output display.
8.7.1 PiP MODE
The PiP mode selection is either OFF (default), ONE(single PiP), PaP, TILE 1+4, TILE 1+12, TILE 0+16(multiple PiP), Side-by-
Side, and Side-by-Side Vertical Stretch. The values of the corresponding setup are not displayed when PiP mode is OFF.
The sub-menu items: aspect, ration, size, and position apply to single PiP mode only.
Sub-menu items: ASPECT RATIO, SIZE, and POSITION apply only to single PiP mode.
Sub menu item TILE mode apply only to multiple PiP modes.
PiP SETUP
PiP MODE -OFF
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP SETUP
PiP MODE -OFF
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP SETUP
PiP MODE - ONE
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP
MAIN
PiP SETUP
PiP MODE - TILE
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
MAIN
-13-
TV SETUP
MAIN CH 004 ADD
PiP #01 CH 027
TV SOURCE CATV
TV SETUP
MAIN CH 004 ADD
PiP #01 CH 027
COUNTRY UK
PiP
MAIN
PiP Off
PiP One
PaP