Specifications

5.0 Pioneer Plasma Setup
1) Turn the main power switch located underneath the plasma on. The Plasma should be in standby (Solid Red LED on
Front). With the Pioneer remote press the Menu button and then press the Standby button within 3 seconds ( hold
buttons down together). The plasma will power on and should read “INTEGRATOR MENU” at the top of the screen.
3)
BAUD RATE: Change to 9600BPS
SLOT INPUT: Change to COMPONENT 1 (factory default is RGB) Scroll down to reveal the remaining items.
ORBITER MODE: Change to ON. This feature helps prevent static image burn in.
4)
HDTV MODE: Change to 1080i (factory default is 1035i).
7)
H. POSITION: Change horizontal centering to about 138 for the Pioneer 503 to center the image better.
Do not
2) Select Input 3 using the Pioneer remote button 3.
(factory default is 4800)
ID NO. SET: Change to 00 or any other value. Serial port will not work without ID number.
OPTION TAB
SET UP TAB
SCREEN TAB
Note: For Optimal size settings, in the TVP-1000 Display Setup (access only with PiP setup-PiP Mode
off), set the Horizontal size (H SIZE) to 95 and the Vertical Size (V SIZE) to 95.
-4-