Specifications

7.0 Remote Control
Using the Aurora IRC-1a 47 Button Remote
-6-
The Aurora remote has the ability to control the TVP-1000 and the
Pioneer plasma. There are 2 buttons at the top of the remote labeled
TVP-1000 and Plasma. When the TVP-1000 button is pressed, all the
buttons will control functions of the TVP-1000 card provided the plasma
is on input 3. The volume, mute, and power buttons will not work in this
mode. To control the Plasma functions press the Plasma button. The
remote will now replicate the Pioneer remote. Not all the buttons will
function as there are not as many functions on the Pioneer remote.
Keep in mind the remote remembers the last mode selected so it only
needs to be done once. You do not need to press the TVP-1000 and
Plasma button every time before pressing a function. These buttons are
designed to switch the modes of operation. For example, press the
TVP-1000 then use any of the buttons below to control the TVP-1000
card. Now if you want to change the plasma to input 2 and auto size
press the Plamsa button and then the 2 button followed by the auto adj
button.
Version 1a of the Aurora remote has another mode which can be
activated when both the TVP-1000 and Plasma button are pressed and
held for 5 seconds. This only has to be done once to activate the new
mode (mixed mode) of operation. The TVP-1000 button when pressed
will now automatically send the Pioneer command for input 3 when
pressed to make certain the card slot is selected. The volume, mute and
power will control the Pioneer and all the other buttons will control the
TVP-1000 functions. This new mixed mode of commands makes it
easier to control the unit without having to switch back and forth with the
top bottons to control the plasma. The Plasma button will still work as
the other mode controlling only the plasma functions. To get out of the
new mode press the TVP-1000 and Plasma button for 5 seconds again
or removing the batteries of 30 seconds will also default the remote back
to the original mode of operation.
The remote has been color coded and boxed in some areas to make it
easy to isolate the functions that are in common. The green buttons at
the top of the remote are for selecting the main input sources. Below
that are the orange menu control buttons. The keypad follows next for
tuner control and other number entry. The pip functions are the orange
buttons located at the bottom. The source selections for the pip input
and effects can be found here. Some of the buttons will also serve as
quick access functions when in certain modes to make it easier to use.
For example, the orange up and down arrows become the pip blending
control when no menu is on the screen and single pip mode has been
selected.
4
5
6
7
10
11
12
13
15
14
17
19
18
20
16
21
22
23
24
25
26
27
28
29
30
32
31
33
34
35
36
37
39
38
40
41
42
43
44
45
3
8
9
1 2
8
5
2
7
4
1
9
6
3
0
IRC-1a
SELECT
POWER
Plasma
TVP-1000
MUTE
VOL
CH
MENU
INFO
TV
VIDEO
SVIDEO
RGB
YPbPr
ON/OFF
MODE
SWAP
MOVE
TV VIDEO SVIDEO
RGB
YPbPr
AUTO
SIZE
FORMAT AUTO ADJ AUDIO
LAST
OSD
ADV
PiP FUNCTIONS
MAIN SOURCES