User manual

User Manual Page 17 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
3 INSTALLATION
WARNING: The electrical installation of AURORA must be performed in
compliance with applicable local and national standards and laws.
WARNING: The connection of AURORA to the electrical distribution grid
must be performed only after receiving authorization from the utility that
operates the grid
3.1 Package Inspection
NOTE: The shipper delivered your AURORA inverter to the carrier safely
packaged and in perfect condition. Upon acceptance of the package, the
carrier assumes responsibility for its safe delivery. In spite of careful handling
during transportation, damage to package or its contents sometimes occurs.
The customer is encouraged to perform the following checks:
¾ Inspect the shipping box for apparent damage, such as holes, cracking, or any
signs of possible damage to its contents.
¾ Record any damage or shortage in the receiving documents and have the carrier
sign his/her full name.
¾ Open the shipping box and inspect the contents for internal damage. While
unpacking, be careful not to discard any equipment, parts or manuals. If any
damage is detected, call the delivering carrier to determine the appropriate action.
Save all shipping material in case the carrier should send an inspector to verify
damage!
¾ If the inspection reveals damage to the AURORA inverter, call your supplier, or
authorized distributor. They will determine if the equipment should be returned
for repair. They will also provide instructions on how to get the equipment
repaired.
¾ It is the customer's responsibility to file a claim with the carrier. Failure to file a
claim with the carrier may void all warranty service rights for any damage.
¾ Save the original package your AURORA inverter arrived in for use in case you
should need to return it for repair in the future.