User manual

User Manual Page 19 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
3.3 Selecting the place of installation
The installation place should be selected based on the following considerations:
¾ Height from ground level should be enough to ensure that display and status LEDs
are easy to read.
¾ Select a well ventilated place sheltered from direct sun radiation. Choose a place
that allows unobstructed airflow around the unit.
¾ Allow sufficient room around the unit to enable easy installation and removal from
the mounting surface.
¾ A door is provided on the unit’s front panel for hardware maintenance purpose.
The USB port for software connection is on the right side of the inverter (protected
by a cover); installation should provide free access to this side, otherwise you will
have to remove the unit from its mounting surface during maintenance operations.
The following figure shows the recommended minimum clearances around the
inverter:
Fig.5. - Minimum clearances around AURORA inverter
8”
6”
6”2”