User manual

User Manual Page 21 of 74

(PVI-6000-OUTD-UK-W Rev.1.0)

Fig.6 -. AURORA wall mounting

NOTE: Ensure that the AURORA inverter is not exposed to direct sun

radiation or other external heat sources, including the units installed

underneath it (see Fig. 7). If several inverters are stacked up, the heat

generated by the inverters placed at the bottom of the stack could cause

ambient temperature to rise and affect the operation of the inverters in the

upper rows. Temperatures exceeding 40°C could result in the derating of the

output power of the units placed in the upper rows.

A combination of high output power and high ambient temperature will result

in a significant power derating and a lower energy production. For proper

cooling, make sure to install AURORA to allow unobstructed air flow (for

instance, the front panel should never face a solid surface).

Part.A

Part.B

Part.C

Part.D