User manual

User Manual Page 25 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
¾ Cable gland for DC connection to the rectifier.
Fig. 10 - Connectors on the bottom of the inverter and their labels
WARNING: When making the electrical connections follow the procedure
exactly to avoid exposure to dangerous voltages. Each step of the procedure
is explained in the following paragraphs. To disconnect the AURORA
inverter, perform steps 1/6 and 2/6 and then disconnect the AC and DC
connectors.
¾ The wind turbine need to be blocked with a mechanical brake prior to be
connected to the AURORA inverter to make sure that there is no voltage on the
cable that can result in a safety hazard.