User manual

User Manual Page 37 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
KEY:
LED on
LED blinking
LED off
Any one of the above conditions
LEDs Status Operational Status Remarks
1
green:
yellow:
red:
Inverter is not operating
Input voltage less than 50Vdc
at the input
2
green:
yellow:
red:
Inverter is initializing,
loading settings and
performing grid check
It is a transition status while
operating conditions are
checked
3
green:
yellow:
red:
Inverter is powering the
grid
Normal operation
4
green:
yellow:
red:
Inverter is shut down
because of a GFI fault
Ground fault has been
detected
5
green:
yellow:
red:
Inverter defected a fault
The fault can be inside or
outside the inverter. See the
alarm code appearing on the
LCD
6
green:
yellow:
red:
Installation phase:
inverter is disconnected
from grid
During installation it refers to
setup of the address for RS-
485 communication
7
green:
yellow:
red:
Inverter is disconnected
from grid
Indicates a missing grid
connection
NOTE: Inverter status is indicated by the corresponding LEDs and by a
display message that provides a description of operation or fault condition
(see next sections).