User manual

User Manual Page 46 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
9A)
Vin: input voltage value
Iin1: Instant input current value
10A)
Pin: Measured instant input power
11A)
Riso: Measured insulation resistance. Unlike the parameters discussed above, this is
not an instant value but a measurement taken one time during inverter start-up.
12A)
If all items described above are tested OK, the inverter shows a corresponding
message in the display top line along with date and time. Clock malfunctioning or
other non function-related faults (meaning such faults that do not affect the inverter's
ability to generate energy) are shown in the bottom line of the display in place of date
and time.
The following error messages are provided:
- CLOCK FAIL indicates clock malfunction, contact service
- BATTERY LOW
- SET TIME, appears the first time the unit is powered up or after the battery has been
replaced.
- FAN FAIL: contact service
- MEMORY FAIL: Data logging malfunction. Contact service.
Inverter OK
Wed 17 Ma
y
11 23
Riso 0.0 Mohm
Ilea
k
73 mA
Pin 0 W
Vin 0 V
I in 0.0 A