User manual

User Manual Page 52 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
The display has 2 lines; use the buttons on the side of the display to scroll through
items or open the corresponding submenus as described in section 5.5.4 A FEW
POINTERS ON DISPLAY DATA READING.
An arrow on left side of the display highlights your current selection. When an item is
selected, press ENTER to open the submenu.
5.5.6.1 Address
This function is used to set addresses for communication with inverters connected in
the system on RS-485 line. You can assign numbers from 2 to 250. Press UP and
DOWN to scroll through numbers.
If you do not want to manually set the address of each inverter, select the AUTO
function and they will be assigned automatically.
5.5.6.2 Display set
This function is used to set display features:
1) Light: display backlight setting:
- Use the MODE submenu to set display backlight.
Select the Mode with the arrow, and press ENTER to open the relevant submenu. The
following screen is:
ON
OFF
Auto
Mode
Intensit
y
Light
Contrast
Buzzer
New Address
Auto
New Address
248
AUTO
2
3
…..
…..
249
250
AUTO