User manual

User Manual Page 53 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
ON: Light is always on
OFF: Light is always off
AUTO: Automatic light setting. It turns on every time a button is pressed and stays on
for 30 seconds then gradually turns off.
2) Contrast: display light contrast
Available display light tones from 0 to 9.
Press UP and DOWN to scroll through numbers and press ENTER to select.
3) Buzzer: key tone setting
Selecting:
ON: key tone is on
OFF: key tone is off
5.5.6.3 Service
Only installers and their staff can gain access to this function, which is password-
protected. The password can be provided by Power-One.
5.5.6.4 New password
This function is used to change the default password 0000.
To set your personal code, use the display keys as follows:
¾ Use ENTER to move from one digit to the next (from left to right)
¾ Use ESC to go back to the previous digit (from right to left)
¾ Press ESC repeatedly to go back to previous menus as described in 5.5.3
¾ Press DOWN to scroll numbers backwards (from 9 to 0)
¾ Press UP to scroll numbers from 0 to 9
5.5.6.5 Cash
This function helps quantifying energy savings.
Name: set desired currency, using keys as usual. Default currency is Euro.
Val/KWh: it indicates the cost of 1 KWh expressed in set currency. Default setting is
0.50 Euro.
Name EUR
Val/KWh 00.50