User manual

User Manual Page 55 of 74
(PVI-6000-OUTD-UK-W Rev.1.0)
The display has 2 lines; use the buttons on the side of the display to scroll through
items or open the corresponding submenus.
An arrow on the left side of the display highlights your current selection. When an
item is selected, press ENTER to open the submenu.
As soon as a test is selected, the display shows
During the test the display gives test progress indication.
If the test is passed, depending on selected item, the display shows:
V= measured voltage; T= time necessary to take the measurement
F= measured frequency; T= time necessary to take the measurement
If the test has failed, the following will be displayed:
V= measured voltage; T= time necessary to take the measurement
F= measured frequency; T= time necessary to take the measurement
5.5.6.10 Alarm
The inverter features an alarm function that controls a relay which contacts are
connected to the terminal block accessible through the front panel as shown in Fig. 22.
The NC and NO contacts can be used to activate external circuitry or a visual or audio
alarm in case the inverter is disconnected from the grid (no energy output) or for any
alarm event generated by the system.
Test I=…. mA
OK T= ….ms
Test I=…. mA
Fail T= ….ms
Test F=…. Hz
Fail T= ….ms
Test F=…. Hz
OK T= ….ms
Test V= …. V
Fail T= ….ms
Test V= …. V
O
K
T= ….ms
Test in process
………………..