User Manual

Aug/2009
C3 RS-1000 OP
12
Spin down the
switch to page 6
Press button 4.
Press buttons 1 & 2
at same time to set
the remote defaults.
OPERATION:
A. REMOTE TRANSMITTER OPERATION:
Transmitter Button System Function Remark
1
Lock Doors & Arm System / Button 1
- Arm and Bypass Zone 4. Shock Sensor Press twice within 3 seconds
then Arm System and Hidden, (Silent) Alarm
Function
Press within 3 seconds
Car Locator
Upon armed
(3-second) Panic function Press and Hold for 3 seconds.
To cancel.
+ Silent Arming / Disarming Ignition in "off" position.
+ (2-second) Active Anti Car-Jacking Mode. Programming
required
Ignition in "on" position press and
hold for 2 seconds
2
Unlock Doors & Disarm System / Button 2
-
Two Steps Door Unlock & Disarm System Press twice within 3 seconds.
3
(3
-
second)
Trunk Release (Channel 3)
Press and Hold for 3 seconds
- Passive Arming By-pass While the system Disarmed.
Turn ON & Off The Remote Start / Button 4 .
-
Safety Start. Programming required Press twice within 3 seconds.
+
Channel # 4 Timer Output
Programming required
+ Channel # 5 Timer Output Programming required
+ Channel # 6 Timer Output Programming required
II
Switching code For 2nd Car Operation. For regular remote transmitter
Button Function Selection For Two way Remote transceiver
Confirm Button / Back to Main Page For Two way Remote transceiver
Feature Selection For Two way Remote transceiver
B. LED display:
LED Function LED Function
Off Disarmed 1 flashes... pause Zone 1 / Trigger on Hood
Slow Flash Armed 2 flashes... pause Zone 2 / Trigger on Trunk
Fast Flash Passive Arming 3 flashes... pause Zone 3 / Trigger on Door Switch
On (Solid) Valet Mode 4 flashes... pause Zone 4 / Trigger on Shock Sensor
Pause On Password Lock-Out 5 flashes... pause Zone 5 / Trigger on Ignition Switch
C. CHIRP INDICATORS: D. PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Ajar Warning 3 flashes Disarm / Triggered
4 chirps Disarm / Triggered 12 flashes Car Locator