User Manual

Aug/2009

C3 RS-1000 OP 5

While the

TRIGGERED icon

is flashing.

Push the

button to display

triggered area.

While the

Push the button to see the display

While the

icon is flashing

Push the

button, the c ount

down timer will

display.

Press button 2 to

turn off the count

down time

While the icon flash

Push the button, the OLED screen will display these icons individually i.e. d

aily

start timer, timer start or temperature start, depend on which you selected.

PLEASE

BE SURE YOU FULLY UNDERSTAND THESE FEATURES AND USE EXTREME CAUTION

SO THAT THE VEHICLE IS NOT IN AN ENCLOSED AREA

WHILE RUNNING!

While the icon is

flashing

Push the button, the alert

alarm time will display.

Press button 2 to turn off the

alert alarm timer

D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:

1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen will

display the transceiver button configuration you have selected.

2. Within 5 seconds press buttons 1, 2, 3 or 4 for the remote control “button configuration” you have

selected.

Note: If 5 seconds of inactivity expired, or you push the button, the transceiver button configuration mode

will exit.