User Manual

Aug/2009
C3 RS-1000 OP 6
Spin up the switch
to page 1
Spin up the switch
to page 2
Spin up the switch
to page 3
Spin up the switch
to page 4
Spin up the switch
to page 5
Spin up the switch
to page 6
Spin up the switch
To return to main page.
E. SELECT THE TRANSCEIVER FEATURES :
1. Spin down the Switch to select the transceiver feature you need and the OLED screen will display the
features you have selected.
2. Press buttons 1, 2, 3 or 4 once within 3 seconds . After finishing the selection and the OLED screen will
change the display alternatively.
Note: If 5 seconds of inactivity expire, or you push the button, the transceiver features program mode will
exit.
Spin down the switch
to page 1
Spin down the
switch
to page 2
Spin down the switch
to page 3
Spin down the switch
to page 4
Spin down the
switch to page 5
Spin down the
switch to page 6
Spin down the
switch to return to main
page
.
E- P1- 1. “BUTTON BI SOUND” SETTING: Example: Set the “Button Bi Disable”.
The remote has a short “bi” sound while pressing any of the buttons of the remote transceiver.
Spin down the switch
to page 1
Press button 1 and it
will display the current
setting
Press the button 2 to
change the setting
Press the
button and
the setting is done.
E- P1- 2. “BUTTON LOCK” SETTING: Example: Set the “Button Lock Enable”.