User Manual

Aug/2009
C3 RS-1000 OP 7
Spin down the switch
to page 1
Press button 2 and it
will display the current
setting
Press the button 1 to
change the setting
Press the
button and
the setting is done.
D- P1- 3. “MELODY / VIBRATION MODE” SETTING: Example: Set the Vibration mode.
Spin down the switch
to page 1
Press button 3 and it
will display the current
setting
Press the button 2 to
change the setting
Press the
button and
the setting is done also
the icon will display
on the OLED screen
E- P1- 4. “DEMO MODE”:
Spin down the switch
to page 1
Press button 4 to start
Demo movie
The demo movie
will
begin playing
Press the any Button to
exit.
E- P2- 1. “POWER SAVE” SETTING: Example: Set the “Power Save Enable”.
While in the power save mode, the OLED remote transceiver uses “0” current to save the battery power.
While in Power Save mode the paging portion of the transceiver will not function.
Spin down the switch
to page 2
Press button 1 and it
will display the current
setting.
Press button 1 to
change the setting.
Press the
button and
the setting is done.
E- P2- 2. “PARKING METER” SETTING: Example: Set the “Parking Meter timer for 30 min..”
Note: When the “parking meter” triggers press any button to stop the beeper.
Spin down the switch
to page 2
Press button 2
Press button 1 three
times to set the parking
timer to 30 minutes.
Press the button to
start the parking meter
and the icon will