User Manual

Aug/2009
C3 RS-1000 OP 8
flash on the main page.
D- P2- 3. “PARKING AREA” SETTING: Example: Set the “Parking Area to “B120 of parking structure”
Spin down the switch
to page 2
Press button 3, it will
display previously
parking area
Press button 2 to clear
the parking area, and
the “-” flashes for a new
setting.
Spin up the switch to
set segment “B”
Press button 1 to
confirm the
programmed segment
and move forward to
next segment for
setting.
Spin down the
switch to set segment
“1”
Press button 1 to
confirm the
programmed segment
and move forward to
next segment for
setting.
Spin down the
switch to set segment
“2”.
Press button 1 and
confirm the
programmed segment
and move forward to
next segment for
setting.
Spin down the
switch to segment “0”.
Press button 3 and the
setting is done.
D- P2- 4. “LIGHTING FOR OLED” TIMER SETTING: Example: Set the LCD display from 3 to 5 seconds.
Spin down the switch
to page 2
Press button 4 and it
will display the
previously setting
Press button 2 to
change the setting
Press the
button and
the setting is done.
D- P3- 1. “TIMER” SETTING: Example: Set the timer to 08:20PM