Installation guide

P. 12 Installation Guide CT-3400 TW
MODE 2
* INDICATES DEFAULT SETTING
FUNCTION 1 – Safe start.
OPTION 1 Safe start enabled
OPTION 2* Safe start disabled
OPTION 3 “Swap Start” – enhanced safe start mode with extended safety: To start the engine: press
FUNCTION then LOCK buttons. To trigger AUX 2: press START/STOP
FUNCTION 2 – Engine Run Time
OPTION 1 Run time = 3 minutes in gas mode / 8 minutes diesel mode
OPTION 2* Run time = 15 minutes in gas mode / 20 minutes diesel mode
OPTION 3 Run time = 25 minutes in gas mode / 30 minutes diesel mode
FUNCTION 3 – Idle Mode / Turbo Mode
OPTION 1 IdleMode disabled / Turbo Mode disabled
OPTION 2* Idle Mode enabled / Turbo Mode enabled
FUNCTION 4 – Engine Type and Cold Weather Mode
OPTION 1 Diesel mode with 20-minute run time in cold weather mode (30-sec. delay)
OPTION 2* Gas mode with 3-minute run time in cold weather mode
OPTION 3 Diesel mode with 8-minute run time in cold weather mode (18 sec. delay)
OPTION 4 Diesel mode with 8-minute run time in cold weather mode (7 sec. delay)
FUNCTION 5 – Ignition Valet
OPTION 1 Ignition Valet disabled
OPTION 2* Ignition Valet enabled
MODE 3
* INDICATES DEFAULT SETTING
FUNCTION 1– Home Valet ™
OPTION 1 Home Valet ENABLED
OPTION 2* Home Valet™ DISABLED
FUNCTION 2 – AUX 1 Programming
OPTION 1 Horn confirmation upon the 2
nd
press of the LOCK button
OPTION 2* Priority door access
OPTION 3 Horn confirmation upon the 1
st
press of the LOCK button
FUNCTION 3 – AUX 2 Programming
OPTION 1 Constant output while the FUNCTION then LOCK button is pressed. In safe start mode:
activate AUX 2 by pressing the START/STOP button.
OPTION 2* Toggle ON/OFF (with 30-second timeout)
OPTION 3 4-minute toggle (only when running under remote start)
OPTION 4 Priority door for all doors
FUNCTION 4– AUX 3 / Zone 3 Programming
OPTION 1 1-sec. output when TRUNK button is pressed for 3 sec. with ignition OFF or under remote
run + data output.
OPTION 2* Constant output while the TRUNK button is pressed.
OPTION 3 Disarm/rearm pulse with TRUNK + data output.
FUNCTION 5 – External Trigger
OPTION 1 Zone 3 rearm (trunk pin: a disarm pulse is sent before the trunk opens, the vehicle rearms
4 seconds after the trunk is closed)
OPTION 2* Engine start/stop
OPTION 3 Key sense
OPTION 4 Dome light smart ignition lock
OPTION 5 Pager
MODE4
* INDICATES DEFAULT SETTING
FUNCTION 1 – MULTI-LEVEL FEATURES
OPTION 1 Multi-car Features, Basic Features, Customized Features
OPTION 2* Basic Features, Multi-car Features, Customized Features
OPTION 3 Customized Features, Multi-car Features, Basic Features
OPTION 4 Basic Features, Customized Features, Multi-car Features